Description
Technical Specification
Key
Features
Resources
& Downloads
For fast and efficient connectivity from the network edge device to a backbone switch or server, the managed Gigabit switch is designed to extend existing LANs through two 100/1000Base-SX/LX SFP interfaces using either one or two multimode or singlemode fibers. The Industrial Managed Switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RSTP), but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure.
Typical Applications
Any network utilizing a mix of copper and fiber
Industrial IP connectivity and communication
Self-healing Fast Ethernet backbone networks
Networks using Ethernet devices such as network cameras, access control, intercoms, etc.
Copper Ports (RJ45)
24-10/100/1000Base-T
SFP Uplink Ports
2-100/1000Base-SX/LX/EX/BX SFP
Combo Ports
2-RJ45/SFP
Port Configuration
Auto MDI/MDI-X
Port Speed
Auto-negotiate
Switch Architecture
Store-and-forward
Switch Bandwidth
26Gbps (non-blocking)
MAC Address
8K Entries
Maximum Frame Size
9.6K Bytes (Jumbo Frames)
Flow Control
Back pressure (Half-Duplex)
Fiber Data Rate
1000Base-SX/LX/EX/BX
Fiber Connector
SFP (Mini-GBIC) port
Fiber Type/Distance
Varies by SFP Module
Power Pin Assignment
½ (+), 3/6(-) default
LED Indicators
Power: On/Green
Management Interface
Console CLI, telnet, Web browser, SSH/SSL secure access
Port Configuration
Enable/disable; Auto-negotiation;
Port Mirroring
TX/RX Both; Many to 1 monitoring
Bandwidth Control
Ingress/Egress rate control:
VLAN
IEEE 802.1q tagged-based VLAN
Link Aggregation
IEEE 802.3ad LACP / Static Trunk;
QoS
8 priority queue
Multicasting/IGMP
IGMP/MLD Snooping (v1,v2,v3)
Access Control List
IP-Based ACL/MAC-Based ACL,
SNMP MIBs
RFC-1213 MIB-II
Power Input Voltage
100-240VAC, 50/60Hz
Full Load Power Consumption
18 Watts
Dimensions
483 x 280 x 45mm
Case
IP30 Metal Case
Housing
DIN Rail Mounting
MTBF
>100,000 hours
Operating Temperature
-40°C ~ +80°C
Storage Temperature
-40°C ~ +80°C
Relative Humidity
0% ~ 95% (non-condensing)
24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
2-Port 1000Base-SX/LX/EX/BX SFP Type Slots
2-Port RJ45/SFP Combo Slots
Non-blocking store-and-forward switching
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
Available for operation in Ring or point-to-point configuration
Real-time monitoring via Embedded Surveillance Device Management System
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
Distances up to 100 km with optional SFPs
Available for operation over single mode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rails
