Description Technical Specification Key Features Resources & Downloads
The SF71060MA 10 port gigabit switch has a non-blocking, store-and-forward switching architecture, along with back pressure and IEEE 802.3x PAUSE frame flow control mechanisms that work in combination to ensure efficient data transfer without packet loss.
The RJ45 ports on this 10 port ethernet switch have an auto-negotiation feature that helps automatically detect the type of connection, such as half or full duplex, and speeds such as 10/100/1000 Mbps. Additionally, the auto MDI/MDIX supports seamless integration with networking devices. Auto MDI/MDIX can easily adjust their signals to match the connected device, eliminating the need for crossover cables.
VERSITRON’s 10 port managed industrial switch can be configured in ring or point-to-point setups, ensuring network redundancy. The Embedded Surveillance Device Management System enables real-time monitoring of the switch's health, allowing users to troubleshoot proactively and thereby ensuring optimal network performance.
The SFP ports enable flexible network configurations using SFP transceivers offered by VERSITRON. These transceivers allow users to optimize the value of their fiber investments in environments where electromagnetic interference is a key concern, such as industrial units. The 10 port industrial ethernet switch is adaptable to different network demands, supporting interchangeable SFPs for different fiber types, distances, and connectors, enabling customization depending on the application requirements. This switch assures versatility in deployment, as you can connect it over single or multimode fiber cables for distances of up to 100 km.
This 10 port gigabit Ethernet switch features redundant dual power supply inputs, 4KV Ethernet surge protection, and assures superior reliability across a wide operating temperature range from -40°C to 80°C. The switch is offered with a compact, corrosion-resistant case with a DIN rail attachment, enhancing its suitability for industrial environments.
Typical Applications
Industrial Automation
Surveillance systems
Access control systems
Communication networks
Copper Ports (RJ45) 8-10/100/1000Base-T
SFP Uplink Ports 2-100/1000Base-SX/LX/EX/BX SFP
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
Switch Architecture Store-and-forward
Switch Bandwidth 26Gbps (non-blocking)
MAC Address 8K Entries
Maximum Frame Size 9.6K Bytes (Jumbo Frames)
Flow Control Back pressure (Half-Duplex)
Fiber Data Rate 1000Base-SX/LX/EX/BX
Fiber Connector SFP (Mini-GBIC) port
Fiber Type/Distance Varies by SFP Module
Power Pin Assignment ½ (+), 3/6(-) default
LED Indicators Power: On/Green
Management Interface Console CLI, telnet, Web browser, SSH/SSL secure access
Port Configuration Enable/disable; Auto-negotiation;
Port Mirroring TX/RX Both; Many to 1 monitoring
Bandwidth Control Ingress/Egress rate control:
VLAN IEEE 802.1q tagged-based VLAN
Link Aggregation IEEE 802.3ad LACP / Static Trunk;
QoS 8 priority queue
Multicasting/IGMP IGMP/MLD Snooping (v1,v2,v3)
Access Control List IP-Based ACL/MAC-Based ACL,
SNMP MIBs RFC-1213 MIB-II
Power Input Voltage 100-240VAC, 50/60Hz
Full Load Power Consumption
9 Watts
Dimensions 156 x 114.8 x 60mm
Case IP44 Metal Case
Housing DIN Rail Mounting
MTBF >100,000 hours
Operating Temperature -40°C ~ +80°C
Storage Temperature -40°C ~ +80°C
Relative Humidity 0% ~ 95% (non-condensing)
8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
2-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
Non-blocking store-and-forward switching
RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
Available for operation in Ring or point-to-point configuration
Real-time monitoring via Embedded Surveillance Device Management System
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
Distances up to 100 km with optional SFPs
Available for operation over single mode or multimode fiber over a variety of link budget
Available for operation over 1 or 2 fibers
No in-field optical adjustment required
Redundant dual power supply inputs 48/52 VDC
4KV Ethernet Surge Protection for harsh environment
-40°C to 80°C (-40°F to 176°F) wide range operating temperature
Compact, corrosion resistant case attaches to a standard DIN Rails
