| Technical Data
GENERAL DESCRIPTION
If space is limited at one end of your application link, this product will allow you to use an RS-530 FOM II product at one end and an RS-530 MicroModem at the other end. In fact, the VERSITRON F282xM RS-530 fiber optic modems are designed to provide fiber optic links as interface extenders, modem links, or four channel multiplexers for synchronous, asynchronous, or isochronous data. In addition, units are DTE/DCE switch selectable.
The F282xM modems can be used over multimode or singlemode fiber optic cable, and the link is fully transparent in both directions providing full-duplex, half-duplex, or simplex data transmission up to 64 kbps with source or terminal timing. The fiber optic circuit consists of two units connected via fiber optic cable with data rates and electrical signal characteristics that conform to EIA RS-530 and MIL-STD-114 standards. This is accomplished by multiplexing the control signals along with clock and data signals and transmitting the combined signal to the remote unit. At the remote end the combined signal is de-multiplexed and applied to the interface. The F282xM modem is designed to operate with other VERSITRON F282xM, F280xM, M82xx, M62xx, and F28xx fiber optic modems.
PRODUCT FEATURES
- RS-530 and MIL-STD-188-114 Standards
- Data Rate up to 64 kbps
- Full-Duplex, Half-Duplex or Simplex Transmission
- Transmit up to 14 km
- Source or Terminal Timing
- Multiplexing Capable
- LED Indicators for Instant System Monitoring
- Three available Housing Options
- Standalone or Rackmount
Product Models
| Model |
Function |
Data Rate |
Connector |
Fiber Cable |
Wavelength |
Max Distance |
| F2822M |
RS-530,
MIL-STD-188-114
Fiber Optic Modem |
Up to 64 Kbps |
ST |
MM |
850nm |
2 km |
| F2824M |
RS-530,
MIL-STD-188-114
Fiber Optic Modem |
Up to 64 kbps |
ST |
MM |
1310nm |
8 km |
| F2825M |
RS-530,
MIL-STD-188-114
Fiber Optic Modem |
Up to 64 kbps |
ST |
SM |
1310nm |
14 km |
TECHNICAL SPECIFICATIONS
| Data Rate: |
Terminal Timing - Up to 64kbps
Source Timing - Up to 64 kbps |
| Operation: |
Full Duplex, half duplex, simplex
DCE/DTE Selectable |
| Optical Connector: |
ST |
| Fiber Cable: |
50/125, 62.5/125 or 100/140 mm (with 850nm multimode optics)
50/125 or 62.5/125 mm (with 1300nm multimode optics)
9/125 or 10/125 mm (with 1300nm singlemode optics) |
| Link Margin: |
20 dB |
| Error Rate: |
Better than 10 to the minus 9th. |
| Digital Interface: |
EIA RS-530 / MIL-STD-188-114 asynchronous, synchronous, or isochronous |
| Electrical Connector: |
DB25 Female |
| Power Requirements: |
12 VDC, 1 Amp |
| Operating Temp: |
0° to 50°C (32° to 100°F) |
| Relative Humidity: |
Up to 95% (non-condensing) |
| Altitude: |
Up to 10,000 feet |
| Dimensions: |
7 x 0.9 x 11.8 in/17.8 x 2.3 x 30cm (w x h x L) |
| Weight: |
0.28 kg (10 oz) |
| |
