Your Copper to Fiber Connection

Call Us Email Us

Dual Channel Isolators

FOM II Series F2900 Group Modems | Lifetime Warranty


Call for GSA Pricing
(1-800-537-2296 or 302-894-0699)

GENERAL DESCRIPTION

VERSITRON F2900 Group dual channel isolators are designed for passing telemetry, clock, data or any async or serial data stream in one direction.

As such, these fiber optic modems enhance datacomm/telecomm system flexibility and help lower hardware costs.

Two different versions are available including one transmitter module with two data channels and one receiver module with two data channels. Distances to 30 km are possible.

The F2900 series of products are available with different electrical interfaces to accomodate existing systems through jumper selection. These products may be used in any FOM II enclosure. Click here for Chassis & Accessories

The F2900 Series provides two independent channels over a pair of optical fibers. Each channel isolates signals from RS-232, RS-422, RS-530, RS-449, MIL-STD-188-114A (balanced or unbalanced), TTL or an NRZ type signal from 50 bps to 10Mbps (data agile).

Functioning as stand alone modules or in conjunction with other devices, the new F2900s operate with encryption devices in a datacomm/telecomm link. They are data agile (any frequency) from 50bps to 10Mbps and permit clocking and resynchronizing of encryption equipment from a remote location. The devices pass data or clock signals with Bit Error Rates (BER) of 10 to the minus 9th across the entire bandwidth of 50bps to 10Mbps. Link budget is not less than 19 dB on 100/140 fiber optic cable.

FEATURES

Full data agility adds flexibility and reduces hardware costs. Any signal from 50bps to 10Mbps may be passed to accommodate existing systems as well as signal variations. Note: Unbalanced signals up to 100 Kbps. Balanced signals up to 10 Mbps.

These products transmit data in one direction only, thus preventing data from returning in the opposite direction which helps assure data security.

Wide operations flexibility is also offered by the F2900s since many different electrical interfaces are available (see Selection Guide) to accommodate existing telemetry systems through jumper selection.

Annuciator lights are used as status indicators. Their function is as follows:

Transmitter board (F2900):
PWR - Power on indication for normal operation
ALM - Out of sync indication
TCH1 - Transmit channel one TCH2 - Transmit channel two

Receiver board (F2900):
PWR - Power on indication for normal operation
ALM - Out of sync indication
RCH1 - Receive channel one
RCH2 - Receive channel two

Downloads

Specifications


F2900 Specifications


Selection Guide

Datasheets


F2900 Datasheet


Manuals


F2900 Manual


VERSITRON INC.
83 Albe Drive - Suite C - Newark, DE 19702
Need Help? Call: 1-800-537-2296, or 302-894-0699 Fax: 302-894-0624
Copyright Versitron. All Rights Reserved.